Reverse Pent Shed – Pressure Treated

£639.00

Specifications

The Reverse Pent Shed is a very popular garden shed and comes in a range of sizes starting at 4ft x 4ft, all the way up to 20ft x 10ft. With lots of size options, configurations, and accessories (such as an electrics package), we have a reverse pent garden shed to suit your needs.

All our Reverse Pent Sheds are made with 16mm redwood shiplap timber, 100% pressure treated, and include delivery and assembly in the prices you see – there are no hidden charges!

Specification:

  • Internal eaves height: Approx. 70″
  • Internal ridge height: Approx. 78″
  • Roof: Polyester mineral felt. Tongue and groove cladding. Extra roof framework. All Pent sheds 7ft x 5ft or larger will come with a fully trussed roof – this means there will be no sagging.
  • Walls: Extra strong wall framework with diagonal bracing and redwood shiplap cladding. Stainless steel nails.
  • Floor: Tongue and groove flooring fixed to narrowly spaced floor beams which gives a strong floor with a 2 inch permanent dry air flow.
  • Windows: Fixed toughened glass window(s). 4ft x 4ft has no windows. Reverse Pent sheds 6ft x 4ft or larger come with 2 windows as standard.
  • Door: Single 27″. Galvanised door furniture, including 3 x 12″ T hinges, 2 x turn buttons, 1 hasp and staple, stainless steel nails.
  • FREE fitted shelf
  • Under 2.5m high.
Category:
Add to Wishlist
Add to Wishlist
  • Please Note: Front roof overhang will be deeper as shed size increases.

    All our apex sheds come with 16mm redwood shiplap timber. You can upgrade this to 25mm (before planing) redwood shiplap timber.

    Choose the configuration to suit the location your shed will sit in your garden.

    • Reverse Pent Shed with left hinged door on left side
    • Reverse Pent Shed with right hinged door on right side

    Upgrade your door, or change the side your door opens.

    • As per configuration images above.
    • Upgrading to double doors will give you an opening of approximately 54 inches (2 X 27 Inch doors). PLEASE NOTE: Due to the construction of our double doors they will require a minimum panel width of 6ft for sheds and 8ft for workshops.

    * 

    Upgrade or add additional windows to your apex shed.

    All our pressure treated buildings include a high quality polyester mineral felt as standard. Why not upgrade to a long life EPDM rubber roof?

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.
    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    * 

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    A free site survey is available to inspect your current base. If you choose a concrete base then a free site survey is required before installation. Please beware that bases will increase the height of a building. Building heights shown are for the building only. The customer takes full responsibility for added height due to upgrades. Once installed, these bases guarantee your building installation.

    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request. Price quoted is based on a level ground.
    • Metal door hooks and eyes are available with any building. A great option to help ventilate your building. Price includes fitting.
    • Ventilate your building with a constant airflow to reduce condensation. 2 supplied. Fitted for free or available for self-installation.
    • Add extra security to your building with our galvanised window grill. These are available with all shed and workshop windows. Price includes fitting.
    • Keep your belongings secure and chained down with this under floor security bar with two loops. Price includes fitting.
    • Extra-secure and double-locking mechanism with both anti-cut and anti-saw steel. Supplied with 3 keys.

    Add one of our standard electric packages to your building. Please contact us if you want to upgrade or customise any of these packages.

    PLEASE NOTE: Price does not include connection to the mains, but this can be quoted for.

    Click here for information about our electrics installation service.

    • Includes four white double sockets (one of which includes two USB sockets), strip light, white switch, and a consumer unit. This package is fitted by our fully qualified electrician.
    • Includes four chrome double sockets (one of which includes two USB sockets), strip light, chrome switch, and a consumer unit. This package is fitted by our fully qualified electrician.

    Heavy duty, galvanised door bar. Supplied and fitted. Available for standard shed doors, workshop doors and double doors. Prices include fitting.

  • Protek Royal Exterior is a quick-drying water-based product that is robust, hard wearing, and can be applied to all pressure-treated timber. It is recommended that 3-4 coats be applied. 1 litre will cover approximately 8m². Protek Royal is a high-build formulation, so each extra coat increases the colour, sheen and protection to help weatherproof your building. For added protection, a clear top coat is recommended. Gutters are strongly recommended on all buildings. This product is for self-application.

    All timber buildings supplied by Skinners Sheds require waterproofing. It is the customers responsibility to ensure that the building is fully waterproofed with a quality waterproofing paint, for which we recommend Protek Royal Exterior which is available in 2.5l and 5l tins. 1 litre will cover approximately 8m².

    Protek Royal Exterior is a quick drying water based product that is hard wearing and can be applied to all pressure treated timber. For untreated interlocking cabins, we recommend Protek Wood Preserver then stained inside and out with 3-4 coats of Protek Royal Exterior.

    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.

    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.




    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.

    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.




    • Protek Stain Blocking Primer recommended with this colour.
    • We recommend using a primer when a white or light colour is used.
  • Buildings that are delivered only will be delivered to the front of the property and must be checked and signed for. If you require delivery and assembly then please ensure that you have clear access for us to be able to get the building to the area of assembly. We also require a 100% flat, level and solid base to assemble your building at the time of delivery (If access or base are bad upon our arrival this could result in a recall charge). If you need further assistance please use the the contact form or call us on 01424 716716.

Quantity