Budget Plain Style Summerhouse – Pressure Treated

£1,199.00

Specifications

Despite being the cheapest summerhouse available, it is still built with 16mm pressure treated redwood shiplap timber, tongue and groove roof and floor, and comes built to the same standard as our more expensive summerhouses. If you prefer Georgian windows then why not check out our Budget Georgian Summerhouse.

  • Internal eaves height: Approx. 78”
  • Internal ridge height: Approx. 94”
  • Roof: Polyester mineral felt. Tongue and groove cladding. Extra strong roof framework. 10ft x 8ft or larger will come with a fully trussed roof – this means there will be no sagging. Wavy facia board with Budget Plain and Budget Georgian Summerhouses.
  • Walls: Extra strong wall framework with diagonal bracing. Redwood shiplap cladding. Stainless steel nails.
  • Floor: Tongue and groove flooring fixed to narrowly spaced floor beams which gives a strong floor with a 2 inch permanent dry air flow.
  • Windows: One fixed toughened glass window.
  • Door/s: 6’ x 6’ comes with a 30” single door, over 6’ x 6’ comes with double doors. Six turn buttons. Antique gate latch.
  • Budget Plain – Plain glazed door/s.
  • Under 2.5m high.
  • 100% pressure-treated wood.
Category:
Add to Wishlist
Add to Wishlist
    • Single Door
    • Single Door
    • Double Door
    • Double Door
    • Double Door
    • Double Door
    • Budget Plain Style Summerhouse with door(s) on the left and window on the right of the front gable end panel. PLEASE NOTE: 6ft X 6ft variation comes with a single door.
    • Budget Plain Style Summerhouse with door(s) on the right and window on the left of the front gable end panel. PLEASE NOTE: 6ft X 6ft variation comes with a single door.
    • 16mm shiplap cladding included as standard
    • Upgrade to 25mm (before planing) shiplap cladding
    • 16mm shiplap cladding included as standard
    • Upgrade to 25mm (before planing) shiplap cladding
    • 16mm shiplap cladding included as standard
    • Upgrade to 25mm (before planing) shiplap cladding
    • 16mm shiplap cladding included as standard
    • Upgrade to 25mm (before planing) shiplap cladding
    • 16mm shiplap cladding included as standard
    • Upgrade to 25mm (before planing) shiplap cladding
    • 16mm shiplap cladding included as standard
    • Upgrade to 25mm (before planing) shiplap cladding

    Protect TF200 is a high performance breather membrane with high wet strength, water resistance and vapour permeability. Available in Red, Blue, Black and Green.

    • Standard fixed window.

    All our pressure treated buildings include a high quality polyester mineral felt as standard. Why not upgrade to a long life EPDM rubber roof?

    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.
    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.
    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.
    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.
    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.
    • A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • Upgrade to a EPDM Rubber Roof - Durable, leak free and environmentally friendly. Comes with a 10 year guarantee from the manufacturer and now includes 2 FREE contemporary vents.

    A free site survey is available to inspect your current base. If you choose a concrete base then a free site survey is required before installation. Please beware that bases will increase the height of a building. Building heights shown are for the building only. The customer takes full responsibility for added height due to upgrades. Once installed, these bases guarantee your building installation.

    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request.
    • Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • Manufactured from pressure treated 100 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and fibreglass fibres for extra reinforcement. All obstacles must be removed. Price is an estimate based on perfectly level ground. A FREE site inspection is available on request.
    • Metal door hooks and eyes are available with any building. A great option to help ventilate your building. Price includes fitting.
    • Ventilate your building with a constant airflow to reduce condensation. Fitted for free or available for self-installation.

    Add one of our standard electric packages to your building. Please contact us if you want to upgrade or customise any of these packages.

    PLEASE NOTE: Price does not include connection to the mains, but this can be quoted for.

    • Includes four white double sockets (one of which includes two USB sockets), strip light, white switch, and a consumer unit. This package is fitted by our fully qualified electrician.
    • Includes four chrome double sockets (one of which includes two USB sockets), strip light, chrome switch, and a consumer unit. This package is fitted by our fully qualified electrician.
  • Protek Royal Exterior is a quick-drying water-based product that is robust, hard wearing, and can be applied to all pressure-treated timber. It is recommended that 3-4 coats be applied. 1 litre will cover approximately 8m². Protek Royal is a high-build formulation, so each extra coat increases the colour, sheen and protection to help weatherproof your building. For added protection, a clear top coat is recommended. Gutters are strongly recommended on all buildings. This product is for self-application.

    All timber buildings supplied by Skinners Sheds require waterproofing. It is the customers responsibility to ensure that the building is fully waterproofed with a quality waterproofing paint, for which we recommend Protek Royal Exterior which is available in 2.5l and 5l tins. 1 litre will cover approximately 8m².

    Protek Royal Exterior is a quick drying water based product that is hard wearing and can be applied to all pressure treated timber. For untreated interlocking cabins, we recommend Protek Wood Preserver then stained inside and out with 3-4 coats of Protek Royal Exterior.

    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.

    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.




    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.

    • Protek Stain Blocking Primer recommended with this colour.
    • Protek Stain Blocking Primer recommended with this colour.




    • Protek Stain Blocking Primer recommended with this colour.
    • We recommend using a primer when a white or light colour is used.
  • Buildings that are delivered only will be delivered to the front of the property and must be checked and signed for. If you require delivery and assembly then please ensure that you have clear access for us to be able to get the building to the area of assembly. We also require a 100% flat, level and solid base to assemble your building at the time of delivery (If access or base are bad upon our arrival this could result in a recall charge). If you need further assistance please use the the contact form or call us on 01424 716716.

Quantity