Pressure Treated Log Cabin Side Store

£499.00

Specifications

Ideal for garden storage, these log cabin side stores are based on our Pressure Treated Pent Sheds but with a slightly reduced height to fit comfortably below the roof overhang of all our log cabins.

  • Polyester mineral felt
  • Tongue and groove roof cladding
  • Extra strong roof framework
  • Extra strong wall framework with diagonal bracing
  • Redwood shiplap cladding
  • Tongue and groove flooring
  • Floor beams
  • Fixed toughened glass window(s)
  • Single 27″ door
  • Galvanised door furniture including, 3 12″ T hinges, 2 turn buttons, 1 hasp and staple, stainless steel nails
  • 100% pressure treated timber
  • Free shelf fitted
  • Two toughened glass windows
  • Under 2.5m high
Add to Wishlist
Add to Wishlist
  • FREE 100% PRESSURE TREATMENT • FREE DELIVERY • FREE ASSEMBLY
    • 499 £
      2 Plain Windows
    • 0 £
      Standard fixed window.
    • 0 £
      To replace the standard glass with Perspex.
    • 30 £
      One bottom opening window.
    • 60 £
      Two bottom opening Windows.
    • £
      Heavy duty mineral felt included as standard with all buildings.
    • 108 £
      Upgrade to Firestone EPDM Rubber Roof cut to your roof size - no Joins, No Leaks. Comes with a 20 year guarantee. Now includes 2 FREE contemporary vents.
    • 84 £

    A free site survey is available to inspect your current base. If you choose a heavy or concrete base then a free site survey is required before installation. Please beware that bases will increase the height of a building. Building heights shown are for the building only. The customer takes full responsibility for added height due to upgrades. Once installed, these bases guarantee your building installation.

    • £
      Choose this option if you will have a 100% flat, level and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and to allow for future maintenance
    • 129 £
      Manufactured from pressure- treated 100 x 50mm timber in a grid with diagonal bracing. For use on flat and level concrete or decked areas. Also suitable for uneven concrete, tarmac or hard ground. There should be no more than 6” fall.
    • 240 £
      Manufactured from pressure-treated 150 x 50mm timber. Rot proof recycled plastic legs, concreted in the ground, infilled with pressure treated joints. Damp proof membrane included to help prevent damp. This base is for use on uneven ground up to a 12 inch tolerance. All obstacles must be removed. A FREE site inspection is available on request.
    • 290 £
      A concrete base is recommended for all buildings. Our bases are laid on a damp proof membrane with a minimum thickness of 100mm and reinforcement mesh is included. All obstacles must be removed. A FREE site inspection is available on request.
    • 29 £
      Add extra security to your building with our galvanised window grill. These are available with all shed and workshop windows. Price includes fitting.
    • 58 £
      Add extra security to your building with our galvanised window grill. These are available with all shed and workshop windows. Price includes fitting.
    • 49 £
      Keep your belongings secure and chained down with this under floor security bar with two loops. Price includes fitting.
    • 79 £
      Heavy duty, galvanised security door bar. Available for standard shed doors, workshop doors and double doors. Price includes fitting.
    • 99 £
      Heavy duty, galvanised security door bar. Available for standard shed doors, workshop doors and double doors. Price includes fitting.
    • 109 £
      Heavy duty, galvanised security door bar. Available for standard shed doors, workshop doors and double doors. Price includes fitting.
  • All cabins MUST be treated and sealed to prevent water penetration as soon as possible. We recommend you fit gutters, add vents, apply Protek timber treatment, and then apply three coats of Protek Royal Exterior.

    All timber buildings supplied by Skinners Sheds require waterproofing. It is the customers responsibility to ensure that the building is fully waterproofed with a quality waterproofing paint, for which we recommend Protek Royal Exterior which is available in 2.5l and 5l tins. 1 litre will cover approximately 8m².

    Protek Royal Exterior is a quick drying water based product that is hard wearing and can be applied to all pressure treated timber. For untreated interlocking cabins, we recommend Protek Wood Preserver then stained inside and out with 3-4 coats of Protek Royal Exterior.

    • 65 £

  • Protek Royal Exterior is a quick-drying water-based product that is robust, hard wearing, and can be applied to all pressure-treated timber. It is recommended that 3-4 coats be applied. 1 litre will cover approximately 8m². Protek Royal is a high-build formulation, so each extra coat increases the colour, sheen and protection to help weatherproof your building. For added protection, a clear top coat is recommended. Gutters are strongly recommended on all buildings. This product is for self-application.

    All timber buildings supplied by Skinners Sheds require waterproofing. It is the customers responsibility to ensure that the building is fully waterproofed with a quality waterproofing paint, for which we recommend Protek Royal Exterior which is available in 2.5l and 5l tins. 1 litre will cover approximately 8m².

    Protek Royal Exterior is a quick drying water based product that is hard wearing and can be applied to all pressure treated timber. For untreated interlocking cabins, we recommend Protek Wood Preserver then stained inside and out with 3-4 coats of Protek Royal Exterior.

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £

    • 39 £
    • 39 £
    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £

    • 65 £
    • 65 £
  • Buildings that are delivered only will be delivered to the front of the property and must be checked and signed for. If you require delivery and assembly then please ensure that you have clear access for us to be able to get the building to the area of assembly. We also require a 100% flat, level and solid base to assemble your building at the time of delivery (If access or base are bad upon our arrival this could result in a recall charge). If you need further assistance please use the the contact form or call us on 01424 716716.

    • £
    • £
Quantity