Pressure Treated Corner Belvoir Summerhouse

£1,690.00

Specifications

The Belvoir Summerhouse would look perfect in the corner of any garden. The building shown here is fitted with the following optional extras: Leaded opening windows,  and doors, and triple layered slatted wooden roof.

  • Roof: Traditional cut and pitched roof with Polyester mineral felt. Tongue and groove cladding. Extra strong roof framework.
  • Walls: Extra strong 75mm x 50mm heavy framework with diagonal bracing. Redwood shiplap cladding.
  • Floor: Tongue and groove flooring. Floor beams and floor bearers with 3″ clearance for air flow.
  • Windows: Two plain fixed toughened glass windows.
  • Door/s: Fully glazed toughened glass joinery doors. 6’ x 6’ comes with a single door. All larger sizes come with double doors. Black antique door furniture, including antique handle lock and key, three turn buttons and stainless steel nails.

A site inspection may be required if you order the triple wooden roof. We manufacture the wooden roof for 6 x 6 & 8 x 6 delivered whole. The 10 x 8 roof is delivered in half. Please check panel dimensions. View delivery information.

  • FREE 100% PRESSURE TREATMENT • FREE DELIVERY • FREE ASSEMBLY
    • 1690 £
      Comes with a single door. Belvoir shown with upgraded leaded windows & doors, and triple layer wooden roof.
    • 2040 £
      Comes with a double doors. Belvoir shown with upgraded leaded windows & doors, and triple layer wooden roof.
    • 2370 £
      Comes with a double doors. Belvoir shown with upgraded leaded windows & doors, and triple layer wooden roof.
    • 2690 £
      Comes with a double doors. Belvoir shown with upgraded leaded windows & doors, and triple layer wooden roof.
    • 2990 £
      Comes with a double doors. Belvoir shown with upgraded leaded windows & doors, and triple layer wooden roof.
    • £
      16mm shiplap cladding included as standard.
    • 180 £
      Upgrade to 25mm (before planing) shiplap cladding
    • £
      16mm shiplap cladding included as standard.
    • 245 £
      Upgrade to 25mm (before planing) shiplap cladding
    • £
      16mm shiplap cladding included as standard.
    • 320 £
      Upgrade to 25mm (before planing) shiplap cladding
    • £
      16mm shiplap cladding included as standard.
    • 405 £
      Upgrade to 25mm (before planing) shiplap cladding
    • £
      16mm shiplap cladding included as standard.
    • 500 £
      Upgrade to 25mm (before planing) shiplap cladding
    • 0 £
      Standard fixed window.
    • 45 £
    • 45 £
    • 90 £
      PLEASE NOTE: This option is only applicable to the 8x6 and above.
    • 90 £
    • 55 £
    • 300 £
    • 65 £
    • 95 £

    All our pressure treated buildings include a high quality polyester mineral felt as standard. Why not upgrade to felt shingle tiles?

    • £
      A quality polyester mineral felt is included as standard with all of our buildings. If your building is being delivered only then you will receive a free fitting kit.
    • 126 £
      Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • 126 £
      Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716
    • 126 £
      Improve the appearance of your building with our felt tiles. These are not recommended for buildings in open or exposed areas. For delivery only price, please call 01424 716716

    Walls Insulated with rockwool, roof and walls cladded using pine match boarding, giving a total wall thickness of 110mm. Keeps your building cool in Summer and warm in Winter.

    • £
    • 468 £
      Walls Insulated with rockwool, roof and walls cladded using pine match boarding, giving a total wall thickness of 110mm. Keeps your building cool in Summer and warm in Winter.
    • £
    • 637 £
    • £
    • 832 £
    • £
    • 1053 £
    • £
    • 1300 £
    • £
    • 299 £
      PLEASE NOTE: 6x6 Roof delivered in one piece. Site inspection may be required.
    • £
    • 299 £
      PLEASE NOTE: Roof delivered in two half sections. Site inspection may be required.
    • £
    • 299 £
      PLEASE NOTE: Roof delivered in 2 half sections. Site inspection may be required.
    • £
    • 299 £
      PLEASE NOTE: Roof delivered in 4 sections. Site inspection may be required.
    • £
    • 425 £
      PLEASE NOTE: Roof delivered in 4 sections. Site inspection may be required.

    A free site survey is available to inspect your current base. If you choose a heavy or concrete base a free site survey is required before installation. Please beware that bases and bearers will increase the height of a building. Building heights shown are for the building only. The customer takes full responsibility for added height due to upgrades.

    • £
      Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • 75 £
      Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • 159 £
      Manufactured from pressure treated 150 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • 360 £
      Recommended for all buildings. Concrete bases are laid on a damp roof membrane, reinforced with mesh, and have a minimum thickness of 100mm. Once installed. this guarantees your building installation.
    • £
      Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • 90 £
      Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • 196 £
      Manufactured from pressure treated 150 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • 490 £
      Recommended for all buildings. Concrete bases are laid on a damp roof membrane, reinforced with mesh, and have a minimum thickness of 100mm. Once installed. this guarantees your building installation.
    • £
      Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • 118 £
      Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • 256 £
      Manufactured from pressure treated 150 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • 640 £
      Recommended for all buildings. Concrete bases are laid on a damp roof membrane, reinforced with mesh, and have a minimum thickness of 100mm. Once installed. this guarantees your building installation.
    • £
      Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • 149 £
      Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • 324 £
      Manufactured from pressure treated 150 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • 810 £
      Recommended for all buildings. Concrete bases are laid on a damp roof membrane, reinforced with mesh, and have a minimum thickness of 100mm. Once installed. this guarantees your building installation.
    • £
      Choose this option if you have a 100% flat, level, and solid base ready for the building to be assembled onto upon our arrival. We recommend a minimum of 12" clearance around your building to ensure we are able to assemble your building correctly and allow for future maintenance.
    • 185 £
      Treated timber bearers are highly recommended. They improve the airflow underneath your building, and will extend the life if erected in damp and wet areas. Bearers are not used to rectify base problems or levels - If you have base or level problems then consider a Heavy or Concrete base.
    • 400 £
      Manufactured from pressure treated 150 x 50mm timber with bracing in each corner. When installed these are staked out and levelled with timber or metal legs when needed to ensure a perfect level. For use on uneven ground up to a 4 inch tolerance.
    • 1000 £
      Recommended for all buildings. Concrete bases are laid on a damp roof membrane, reinforced with mesh, and have a minimum thickness of 100mm. Once installed. this guarantees your building installation.
    • 12 £
      Metal door hooks and eyes are available with any building. A great option to help ventilate your building. Price includes fitting.
    • 49 £
      Ventilate your building with a constant airflow to reduce condensation. Fitted for free or available for self-installation.
    • 680 £
      Includes four white double sockets (one of which includes two USB sockets), strip light, white switch, and a consumer unit. This package is fitted by our fully qualified electrician.
    • 770 £
      Includes four chrome double sockets (one of which includes two USB sockets), strip light, chrome switch, and a consumer unit. This package is fitted by our fully qualified electrician.
    • 770 £
      Includes four brass double sockets (one of which includes two USB sockets), strip light, brass switch, and a consumer unit. This package is fitted by our fully qualified electrician.
    • £
    • 90 £
      Lined with protect TF200 which gives a vapour barrier
    • 90 £
      Lined with protect TF200 which gives a vapour barrier
    • 90 £
      Lined with protect TF200 which gives a vapour barrier
    • 90 £
      Lined with protect TF200 which gives a vapour barrier
  • Protek Royal Exterior is a quick-drying water-based product that is robust, hard wearing, and can be applied to all pressure-treated timber. It is recommended that 3-4 coats be applied. 1 litre will cover approximately 8m². Protek Royal is a high-build formulation, so each extra coat increases the colour, sheen and protection to help weatherproof your building. For added protection, a clear top coat is recommended. Gutters are strongly recommended on all buildings. This product is for self-application.

    All timber buildings supplied by Skinners Sheds require waterproofing. It is the customers responsibility to ensure that the building is fully waterproofed with a quality waterproofing paint, for which we recommend Protek Royal Exterior which is available in 2.5l and 5l tins. 1 litre will cover approximately 8m².

    Protek Royal Exterior is a quick drying water based product that is hard wearing and can be applied to all pressure treated timber. For untreated interlocking cabins, we recommend Protek Wood Preserver then stained inside and out with 3-4 coats of Protek Royal Exterior.

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 37 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

    • 49 £

  • Buildings that are delivered only will be delivered to the front of the property and must be checked and signed for. If you require delivery and assembly then please ensure that you have clear access for us to be able to get the building to the area of assembly. We also require a 100% flat, level and solid base to assemble your building at the time of delivery (If access or base are bad upon our arrival this could result in a recall charge). If you need further assistance please use the the contact form or call us on 01424 716716.

    • £
    • £
Quantity